Nor-Tech’s Voyageur 4 GPU Server
Expect uncompromising quality, best performance per-watt, per square-foot, per-dollar; lowest total cost of ownership and highest quality components and materials. Nor-Tech’s 4 GPU server supports up to 4 active/passive GPUs in 1U and comes with GPU health monitoring and fan speed control.
All of Nor-Tech’s HPC technology is backed by our industry-leading NT-EZ HPC Cluster Support Solutions Portfolio
View Specs
GPU Engine Specs:
CPU
- Dual Socket P (LGA 3647)
- Intel® Xeon® Scalable Processors,
3 UPI up to 10.4GT/s - Support CPU TDP up to 165W
Cores
- Up to 28 Cores with Intel® HT Technology
Memory Capacity
- 12 DIMM slots
- Up to 1.5TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM, DDR4 up to 2666MHz
Memory Type
- 2666/2400/2133MHz ECC DDR4 SDRAM
Chipset
- Intel® C621 chipset
SATA
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPM
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
- ASPEED AST2500 BMC
Input/Output
SATA
- 4 SATA3 (6Gbps) ports
LAN
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 2 USB 3.0 ports (rear)
Video
- 1 VGA port
Serial Header
- 1 Fast UART 16550 header
System BIOS Type
- AMI 32Mb SPI Flash ROM
Software
- Intel® Node Manager
- IPMI 2.0
- KVM with dedicated LAN
- SSM, SPM, SUM
- SuperDoctor® 5
- Watch Dog
Power Configurations
- ACPI / APM Power Management
Health Monitoring: CPU
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
Health Monitoring: Fan
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Health Monitoring: Temperature
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
Chassis Specs
Form Factor
- 1U Rackmount
Dimensions
- Height: 1.7″ (43mm)
- Width: 17.2″ (437mm)
- Depth: 35.2″ (894mm)/39.3″(997mm) with rails
- Package: 24″ (H) x 8″ (W) x 46″ (D)
Weight
- Net Weight: 45 lbs (20.4 kg)
- Gross Weight: 58 lbs (26.31 kg)
Key Features
The Voyageur 4 GPU server supports up to 4 active/passive GPUs in 1U and comes with GPU health monitoring and fan speed control.
Features include
- Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s
- Up to 1.5TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 12 DIMM slots
- 4 PCI-E 3.0 x16 (FHFL) slots, 2 PCI-E 3.0 x16 (LP) slots
- 2 Hot-swap 2.5″ SAS/SATA drive bays, 2 Internal 2.5″ drive bays
- Supports 1x M.2 2242/2260/2280, Supports M.2 SATA and NVMe
- 2x 10GBase-T LAN ports via Intel X540
- 9 Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
- 2000W Redundant Power Supplies, Titanium Level (96%)
Software Integration Expertise
Nor-Tech has a well-deserved reputation as one of the most qualified software integrators in the industry. We work hard to ensure that all software is properly integrated when it leaves our manufacturing facility. This allows clients to begin work within hours of cluster delivery.
Linux Expertise
Nor-Tech is also widely acknowledged as one of the leading experts on Linux high-performance solutions, offering a full range of open source, Linux-based technology from servers to turn-key HPC clusters. This is a key qualifier for system builders and integrators since 99.6% of the fastest supercomputers now run Linux.
Open source software is significantly less expensive. However, without expertise; complexity, troubleshooting, and maintenance are issues. This is where Nor-Tech comes in. Nor-Tech’s engineering team, which averages 10+ years of Linux experience, excels at provisioning, scheduling and resource management of cluster hardware; maximizing compilers and accelerators; and configuring the low latency fabric that connects nodes together.
